How to connect to Wifi from Konica Minolta Machine
>Back To FAQ's Menu
How to Connect to Wifi connection from Konica Minolta Machine
Guide on how to connect to wifi connection from konica minolta machine.
REQUIREMENTS:
- UK-212 Wireless LAN Kit - Optional Wifi Kit that is required in order to use wifi option in Konica Minolta Machine.
For The Older Machine Series / Non I-Series Machine
STEP 1 - On the Konica Minolta machine control panel, click on the [Menu] button then select [Utility].
STEP 2 - Select [Administrator Settings].
STEP 3 - Key in Administrator password then select [OK].
STEP 4 - Select [Network Settings].
STEP 5 - Click on [Forward] then proceed to [Wireless Network Setting].
Note: In case the Wireless Network Setting is not able to seen, the machine might not installed with optional hardware Wifi Kit or the Network I/F Configuration is not set under Wireless Mode. You may need to set to Wireless Mode under option 5: [Network I/F Configuration] and restart machine after change the setting.
STEP 6 - Select [Manual Setting].
STEP 7 - Click on [Access Point List], then select the Wifi connection that want to connect, then click [OK]. 
STEP 8 - The Wifi Name will appear in the [SSID], click on Forward button and proceed to select on [WPA2-PSK(AES)].
STEP 9 - Click on Passphrase to key in Wifi Password and select [OK] to save the password.
STEP 10 - Select [OK] again, then click on [Connection status] to make sure its under status [Connection].
Note: After connect to new wifi, the current ip add machine need to be change to auto to getting the new ip add machine for new wifi, then set back to manual ip again after successfully connected to new wifi to fixed the new ip address.
For The Newer Machine Series / I-Series Machine
STEP 1 - On the Konica Minolta machine control panel, click on the [Home] button then select [Utility].
STEP 2 - Select [Administrator].
STEP 3 - Key in Administrator password then select [OK].
STEP 4 - Select [Network].
STEP 5 - Scroll down then proceed to [Wireless Network Setting] - [Wireless LAN Adapter] - [Direct Input].
Note: In case the Wireless Network Setting is not able to seen, the machine might not installed with optional hardware Wifi Kit or the Network I/F Configuration is not set under Wireless Mode. You may need to set to Wireless Mode under [Network I/F Configuration] and restart machine after change the setting.
STEP 6 - Click [AP Search] to search the Wifi that want to connected.
STEP 7 - Select the Wifi List that want to connect, continue with [OK] button.
STEP 7 - Scroll to bottom and key in Wifi Password under Security Key & Confirm Security Key, select [OK] to save the password.
STEP 8 - Once it completed, proceed to go back to [Wireless LAN Adapter] - [Connection status] to check the wireless status whether is it has been successfully connected. The status [Connection] is where the connection is successfully establish.
Note: After connect to new wifi, the current ip add machine need to be change manual setting to auto setting to getting the new ip add machine for new wifi, then set back to manual ip again using the new ip add that obtain after successfully connected to new wifi to fixed the new ip address. It can be adjusted under [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1].
