>Back To FAQ's Menu

How to make Ping Confirmation at Konica Minolta Machine.

Guide on how to make Ping Confirmation at Konica Minolta Machine.

Once the machine has been setup connectivity with other device, it is be able to send a ping to the device communicating from this machine to check that the connection has been set up correctly. In order to ping from this machine, kindly follow below guideline.

For The Older Machine Series / Non I-Series Machine

STEP 1 - On the Konica Minolta machine, click on [Menu] button, Select [Utility] from Control Panel.

STEP 2 - Select [Administrator Settings], and key in the Administrator password accordingly.

STEP 3 - Click on [Forward] button to go to page 3/4 the select [Detail Settings].

STEP 4 - Select [PING Confirmation].

STEP 5 - Select [Host Address] Under PING TX Address then choose either [Input Host Name] / [IPv4 Address Input] / [IPv6 Address Input] and click [OK] button.

STEP 5 - For example, you have selected [IPv4 Address Input], key in the IP Address that you wanted to ping, and press [OK] then [Check Connection] button to test connection.

STEP 6 - PING status will appear either Completed/Fail, press [OK]. 

STEP 7 - Select the [Close] button all the way to exit the administrator mode. 

For The Newer Machine Series / I-Series Machine

STEP 1 - On the Konica Minolta machine, click on [Home] icon, Select [Utility] from Control Panel.

**You may ping the connection from accessing the web connection also by getting the IP Address machine. You may refer to this for how to get the IP Address from machine then key in Konica Minolta Machine IP Address at web browser, and log in as admin inside the Web Connection.

STEP 2 - Select [Administrator], and key in the Administrator password accordingly.

**On Web Connection login as admin mode by key in administrator password accordingly. The next step will be same option on below for ping confirmation.

STEP 3 - Click on [Maintenance] then select [PING TX Address].

STEP 4 - Under [PING TX Address] then key in either IP Address or Hostname and press [Check Connection] button to test connection.

STEP 5 - PING status will appear either Completed/Fail, press [OK]. 

STEP 7 - Select the [Home] icon all the way to exit the administrator mode.

>Back To FAQ's Menu